op_shell_parameter.h File Reference

Parameters of operations on the solids. More...

#include <cur_contour_on_surface.h>
#include <cur_arc3d.h>
#include <cr_split_data.h>
#include <mb_nurbs_function.h>
#include <op_direct_mod_parameter.h>
#include <op_swept_parameter.h>
#include <position_data.h>
#include <surf_plane.h>
#include <part_solid.h>
#include <surf_spine.h>

Classes
struct	SmoothValues
	Parameters of fillet or chamfer of edge. More...
struct	FullFilletValues
	Parameters of face fillet. More...
struct	CornerValues
	Parameters of vertex fillet. More...
class	HoleValues
	The parameters of notch. More...
class	BorerValues
	The hole parameters. More...
class	PocketValues
	The parameters of pocket or boss. More...
class	SlotValues
	The parameters of slot. More...
class	FastenersValues
	The parameters of fastener elements. More...
class	MbPatchMating
	Patch curve conjugation. More...
class	MbCurveMate
	Curve with conjugation. More...
struct	PatchValues
	The parameters of patch. More...
class	MbPatchCurve
	Curve for the patch construction. More...
class	MbPatchShellParams
	Patch operation parameters. More...
struct	TransformValues
	The parameters of object scaling. More...
struct	NurbsValues
	Parameters of the deformable face. More...
struct	NurbsBlockValues
	The parameters for construction of NURBS-block. More...
struct	NurbsSurfaceValues
	The parameters of spline surface. More...
class	MbNurbsSurfacesShellParams
	The parameters of spline surface. More...
struct	MeshSurfaceValues
	Surface parameter by grid of curves. More...
class	MbMeshShellResults
	Results of construction of a shell by mesh of curves. More...
class	MbMeshShellParameters
	Parameters for creating the shell by mesh of curves. More...
struct	RuledSurfaceValues
	Data for the construction of a ruled surface. More...
struct	ExtensionValues
	The shell extension parameters. More...
struct	JoinSurfaceValues
	Data for construction of surface of the joint. More...
struct	GridsToShellValues
	Operation parameters of grids-to-shell conversion. More...
class	MbGridShellParams
	Operation parameters of grids-to-shell conversion. More...
struct	MedianShellValues
	Operation parameters of median shell between selected faces of solid. More...
class	MedianShellFaces
	Set of faces for build a median shell. More...
class	MbMedianShellParams
	Parameters for creating the median shell. More...
struct	MbMedianShellResults
	Results of creating the median shell. More...
struct	MbShellStitchParams
	Stitch parameters. More...
class	MbShellCuttingParams
	Shell cutting operation parameters. More...
struct	MbShellCuttingParams::ProlongState
	State of prolongation types of cutter surfaces. More...
class	MbTruncateShellParams
	Shell truncating operation parameters. More...
class	MbTruncateShellResults
	Results of shell truncating operation. More...
struct	RectifyValues
	Parameter for an unwrapping the face on a plane. More...
class	MbLocalCubePhantomParams
	Parameter class for the creation of a bounding box phantom in a local coordinate system. More...
class	MbShellChamferParams
	Parameters for creating chamfers for edges of a solid. More...
class	MbDivideShellParams
	Parameter class for a shell division into parts using given edges container. More...
class	MbShellFilletValues
	Parameters for creating a fillet of edges of a solid. More...
class	MbLoftedCurvesShellParams
	LoftedShell operation parameters. More...
class	MbLoftedPointsShellParams
	LoftedShell operation parameters. More...
class	MbLoftedSolidParams
	Input data for lofted solid operation. More...
struct	VariableSectionValues
	Data required for sweeping operation with variable section. More...
class	MbEvolutionShellParams
	Input data for sweeping solid operation. More...
class	MbExtensionShellParams
	Parameter class an extension of an open solid by extrusion. More...
class	MbRuledShellParams
	Parameter class for the creation an open ruled solid. More...
class	MbRuledShellResult
	Output data for the creation an open ruled solid. More...
class	MbIngotSolidParams
	Parameter class for an ingot solid creation from the set of specified objects. More...
class	MbShellFullFilletParams
	Parameters for creating a fillet of a chain of the body faces. More...
class	MbLatheCurvesParams
	Parameters for looking the lathe axis and construction of lathe elements for the solid. More...
class	MbLatheCurvesResult
	The output data of the lathe section for the solid. More...
class	MbRibSolidParameters
	Parameters of a rib. More...
class	MbOctaLatticeParams
	Lattice shell based on three control points, lattice parameters and number of elements. More...
class	MbBooleanOperationParams
	Parameters of Boolean operation. More...
class	MbElementarySolidParams
	Parameters for creating an elementary solid. More...
class	MbElementarySolidResults
	Results of construction an elementary solid. More...
class	MbShellPartParams
	Parameters for extracting a specified part of a decomposing solid. More...
class	MbShellPartResults
	Results of extracting a specified part of a decomposing solid. More...
class	MbHoleSolidParams
	Parameters for creating a shell with a hole, a pocket or a groove. More...
class	MbFilletBundle
	Faces of one solid to create a fillet between two disjoint sets of faces. More...
class	MbFilletData
	Data to create fillet between disjoint faces. More...
class	MbJoinShellParams
	Parameters for creating a join shell. More...
class	MbJoinShellResults
	Results of creating the shell of join. More...
class	MbSmoothPhantomParams
	Parameters for creating phantom surfaces of fillet/chamfer. More...
class	MbSmoothSequenceParams
	Parameters for creating a sequence of smoothly connected edges. More...
class	MbSmoothPhantomResult
	The output data of creating phantom surfaces of fillet/chamfer. More...
class	MbSmoothSequenceResult
	The output data of creating a sequence of smoothly connected edges. More...
class	MbSmoothPositionDataParams
	Parameters for creating support points of fillet/chamfer operation sizes. More...
class	MbSmoothPositionDataResults
	The output data of creating support points of fillet/chamfer operation sizes. More...
class	MbSymmetrySolidParams
	Parameter class by create a symmetric solid relative to a plane. More...
class	MbCutShellSilhouetteParams
	Parameters for creating a solid cutted by a silhouette contour. More...
class	MbCutShellSilhouetteResult
	Results of creating a solid cutted by a silhouette contour. More...
class	MbDraftSolidParams
	Draft operation parameters. More...
class	MbDraftSolidResults
	Results of creating a draft's solid. More...
class	MbSectionResults
	Results of construction of a shell on swept mutable section surface. More...
class	MbBeamElementParams
	Input parameters of "Beam element" operation. More...
class	MbBeamElementResults
	Output parameters of "Beam element" operation. More...
struct	MbSurfaceShellParams
	Parameters for creating the shell by a surface. More...

Enumerations
enum	MbeHoleType { ht_BorerValues = 0 , ht_PocketValues = 1 , ht_SlotValues = 2 }
	Types of notch. More...
enum	MbeSurfaceProlongType
	Prolongation types of cutter objects (surfaces, contour).

Detailed Description

Parameters of operations on the solids.