Direct Building Parameters

Collaboration diagram for Direct Building Parameters:

Classes
struct	ModifyValues
	Old parameters for a solid direct modification. More...
class	MbCollectFacesParams
	Parameters for faces highlighting for solid direct modification. More...
class	MbModifiedSolidParams
	Parameters for a solid direct modification. More...
class	MbModifiedSolidResults
	Results for a solid direct modification. More...
struct	TransformValues
	The parameters of object scaling. More...
struct	NurbsValues
	Parameters of the deformable face. More...
struct	NurbsBlockValues
	The parameters for construction of NURBS-block. More...

Enumerations
enum	MbeModifyingType {   dmt_Remove = 0 , dmt_Create , dmt_Action , dmt_Offset ,   dmt_Fillet , dmt_Supple , dmt_Purify , dmt_Merger ,   dmt_United , dmt_Rotate , dmt_Undefined }
	Old type of modification. More...
enum	MbeModifyingMode {   dmm_Undefined = 0 , dmm_RemoveFaces = 10 , dmm_RemoveFacesWithAdjacentFillets = 11 , dmm_RemoveBelowRadius = 12 ,   dmm_RemoveBelowRadiusWithAdjacentFillets = 13 , dmm_Create = 30 , dmm_MoveFacesByVector = 40 , dmm_MoveFacesByVectorNoAdaptation = 41 ,   dmm_OffsetFaces = 50 , dmm_CylinderRadiusSet = 51 , dmm_CylinderRadiusSetNoAdaptation = 52 , dmm_SphereRadiusSet = 53 ,   dmm_SphereRadiusSetNoAdaptation = 54 , dmm_ConvertFacesToNurbs = 60 , dmm_PurifyFillets = 70 , dmm_PurifyFilletsChains = 71 ,   dmm_PurifyFilletsBelowRadius = 72 , dmm_DeleteEdges = 90 , dmm_UniteFaces = 100 , dmm_RotateFaces = 110 ,   dmm_RotateFacesNoFilletAdaptation = 111 , dmm_FilletsRadiusChange = 120 , dmm_FilletsRadiusSet = 130 , dmm_FilletsRadiusSetSingle = 131 ,   dmm_ReplaceFaces = 140 , dmm_ReplaceGroupFaces = 141 }
	Type of modification. More...

Detailed Description

Enumeration Type Documentation

MbeModifyingType

enum MbeModifyingType

Old type of modification.

Type determines direct modeling actions.

Enumerator
dmt_Remove	Removal of the specified faces with the neighborhood from a solid.
dmt_Create	Creation of a solid from the specified faces with the neighborhood.
dmt_Action	Translation of the specified faces with neighborhood relative to the other faces of the solid.
dmt_Offset	Replacement of the specified faces of a solid with the offset faces (translation along the normal, change of the radius).
dmt_Fillet	Change of radii of the specified fillet faces for the set value.
dmt_Supple	Replacement of the specified faces of a solid with a deformable faces (conversion to NURBS for editing).
dmt_Purify	Removal of the specified fillets from a solid.
dmt_Merger	Merging vertices of edges and edges removal.
dmt_United	Replacing smoothly joined faces with one face.
dmt_Rotate	Rotate the chosen faces.
dmt_Undefined	Inner type.

MbeModifyingMode

enum MbeModifyingMode

Type of modification.

Type determines direct modeling actions.

Enumerator
dmm_Undefined	Inner type.
dmm_RemoveFaces	Removal of the specified faces.
dmm_RemoveFacesWithAdjacentFillets	Removal of the specified faces with the adjacent fillets from a solid.
dmm_RemoveBelowRadius	Remove the close cylindric, spherical faces, extrusion and rotation faces below specified radius.
dmm_RemoveBelowRadiusWithAdjacentFillets	Remove the close cylindric, spherical faces, extrusion and rotation faces below specified radius with the adjacent fillets.
dmm_Create	Creation of a solid from the specified faces with the neighborhood.
dmm_MoveFacesByVector	Translation of the specified faces with neighborhood relative to the other faces of the solid.
dmm_MoveFacesByVectorNoAdaptation	Translation of the specified faces without the adjacent fillets adaptation.
dmm_OffsetFaces	Replacement of the specified faces of a solid with the offset faces (translation along the normal, change of the radius).
dmm_CylinderRadiusSet	Under development. Set new size for cylindrical faces.
dmm_CylinderRadiusSetNoAdaptation	Under development. Set new size for cylindrical faces without the adjacent fillets adaptation.
dmm_SphereRadiusSet	Under development. Set new size for spherical faces.
dmm_SphereRadiusSetNoAdaptation	Under development. Set new size for spherical faces without the adjacent fillets adaptation.
dmm_ConvertFacesToNurbs	Replacement of the specified faces of a solid with a deformable faces (conversion to NURBS for editing).
dmm_PurifyFillets	Removal of the specified fillets from a solid.
dmm_PurifyFilletsChains	Removal of the links of fillets smoothly connected to the chosen fillets.
dmm_PurifyFilletsBelowRadius	Remove the fillets with radius less then specified radius from a solid.
dmm_DeleteEdges	Merging vertices of edges and edges removal.
dmm_UniteFaces	Replacing smoothly joined faces with one face.
dmm_RotateFaces	Rotate the chosen faces with the adjacent fillets adaptation.
dmm_RotateFacesNoFilletAdaptation	Rotate the chosen faces without the adjacent fillets adaptation.
dmm_FilletsRadiusChange	Change of radii of the specified fillet faces for the set value.
dmm_FilletsRadiusSet	Set the radii for the specified smoothly joined fillet faces chain.
dmm_FilletsRadiusSetSingle	Set the radii for the specified fillet faces.
dmm_ReplaceFaces	Under development. Replacement faces of a solid.
dmm_ReplaceGroupFaces	Under development. Replacement group of faces of a solid.