Curvilinear spine for sweep surface. More...

#include <surf_spine.h>

Inheritance diagram for MbSpine:

Collaboration diagram for MbSpine:

Public Types
enum	LocalAxes { la_planeParallel = 0 , la_calcDirection = 1 , la_userDirection = 2 , la_surfaceNormal = 3 , la_optionalCurve = 4 }
	Methods of movement of the local coordinate system along the guide curve "curve". More...

Public Member Functions
Base functions
MbeSpaceType	IsA () const
	A type of element.

MbSpine &	Duplicate (MbRegDuplicate *=nullptr) const
	Create a copy of the element.

bool	SetEqual (const MbSpine &)
	Make equal.

bool	IsSimilar (const MbSpine &) const
	Determine whether the objects are similar.

bool	IsSame (const MbSpine &other, double accuracy=LENGTH_EPSILON) const
	Whether the objects are equal.

void	Transform (const MbMatrix3D &, MbRegTransform *=nullptr)
	Transform element according to the matrix.

void	Move (const MbVector3D &, MbRegTransform *=nullptr)
	Translation.

void	Rotate (const MbAxis3D &, double angle, MbRegTransform *=nullptr)
	Rotate around an axis.

void	Inverse (MbRegTransform *iReg=nullptr)
	Change the direction.

void	Reset ()
	Reset temporary data of an object.

General descriptions of a spine curve domain
double	GetTMax () const
	Get the maximum value of parameter.

double	GetTMin () const
	Get the minimum value of parameter.

bool	IsClosed () const
	Check for curve closeness.

Functions for working in the spine curve's domain.
Functions PointOn, FirstDer... correct parameters when getting out of the spine curve domain bounds.
void	PointOn (double &t, MbCartPoint3D &p) const
	Point on the curve.

void	FirstDer (double &t, MbVector3D &p) const
	The first derivative.

void	SecondDer (double &t, MbVector3D &p) const
	The second derivative.

void	ThirdDer (double &t, MbVector3D &p) const
	Third derivative.

Functions for working inside and outside the spine curve's domain
functions _PointOn, _FirstDer... correct parameters when getting out of the spine curve domain bounds.
void	_PointOn (double t, MbCartPoint3D &p) const
	Point on the curve.

void	_FirstDer (double t, MbVector3D &p) const
	The first derivative.

void	_SecondDer (double t, MbVector3D &p) const
	The second derivative.

void	_ThirdDer (double t, MbVector3D &p) const
	Third derivative.

virtual void	Explore (double &t, bool ext, MbCartPoint3D &pnt, MbVector3D &fir, MbVector3D sec, MbVector3D thir) const
	Calculate point and derivatives of object for given parameter.

Function of moving by spine curve
double	Step (double t, double sag) const
	Calculation of the approximation step by the value of sag.

double	DeviationStep (double t, double angle) const
	Calculation of the approximation step by the deviation angle of the normal vector.

Functions for changing data and access to data
void	TransformMatrix (double v, MbMatrix3D &matrix) const
	Determination of a transfer matrix for generatrix. More...

void	MoveVector (double &v, MbVector3D &vect) const
	Determination of a transfer vector for generatrix. More...

const MbVector3D &	GetOrt0 () const
	The first vector of basis in the calculated spine. More...

void	CalculateMatrix (double &v, bool ext, MbMatrix3D &matrix0, MbMatrix3D &matrix1, MbMatrix3D &matrix2) const
	Calculation of transformation matrices. More...

void	CalculateMatrix (double &v, bool ext, MbMatrix3D &matrix0, MbMatrix3D &matrix1) const

void	CalculateMatrix0 (double &v, bool ext, MbMatrix3D &matrix0) const

void	CalculateMatrix1 (double &v, bool ext, MbMatrix3D &matrix1) const

void	CalculateMatrix2 (double &v, bool ext, MbMatrix3D &matrix2) const

const MbCurve3D &	GetCurve () const
	The spine curve.

MbCurve3D &	SetCurve ()
	Get spine curve for editing.

const MbCurve3D *	GetDirectionCurve () const
	Direction curve.

VERSION	GetVersion () const
	A version of calculation of the vector of transformation matrix orientation.

void	ChangeCurve (const MbCurve3D &)
	Change the spine curve.

void	ChangeOptionalCurve (const MbCurve3D &)
	Change the direction curve.

const MbVector3D &	GetDirection () const
	Vector of transformation matrix orientation.

bool	SetDirection (const MbVector3D &d, bool checkBySpineCurve=false)
	Change the vector of transformation matrix orientation.

LocalAxes	GetLocalAxisMethod () const
	Get the method of orientation of the local coordinate system.

void	SetLocalAxisMethod (LocalAxes la)
	Get the method of orientation of the local coordinate system.

bool	IsParallel () const
	Attribute of plane-parallel translation.

bool	IsUserDirection () const
	Attribute of user direction.

bool	BySurfaceNormal () const
	Attribute of direction as surface normal.

bool	ByOptionalCurve () const
	Attribute of direction by optional curve.

double	GetOrtParam () const
	Parameter of a curve with calculated basis of spine.

void	SetOrtParam (double t)
	Set the parameter of a curve with calculated basis of spine.

void	BaseVectors0 (double &v, bool ext, MbCartPoint3D &origin, MbVector3D &vector0, MbVector3D &vector1, MbVector3D &vector2) const

void	BaseVectors1 (double &v, bool ext, MbVector3D &origin1, MbVector3D &vector0, MbVector3D &vector1, MbVector3D &vector2, MbVector3D &derive0, MbVector3D &derive1, MbVector3D &derive2) const

void	BaseVectors2 (double &v, bool ext, MbVector3D &origin1, MbVector3D &origin2, MbVector3D &vector0, MbVector3D &vector1, MbVector3D &vector2, MbVector3D &derive0, MbVector3D &derive1, MbVector3D &derive2, MbVector3D &second0, MbVector3D &second1, MbVector3D &second2) const

MbPlacement3D	GetPlacement (double v) const
	Construct placement in the given point. More...

void	GetPlacement (double v, MbPlacement3D &pl) const
	Initialize placement for the given point.

size_t	GetSegmentsCount () const
	The number of segments of the spine curve.

void	PrepareWrite () const
	Function of registration by the number of references to avoid multiple writing. More...

const MbSurface *	GetSpineSurface () const
	The surface of the "curve", if it is curve on surface.

const MbCurve *	GetFeatureCurve () const
	Two-dimensional curve of the "curve", if it is curve on surface.

Public Member Functions inherited from MbRefItem
virtual MbeRefType	RefType () const
	Registration type (for copying, duplication).

void	AddRegistrator (MbRegDuplicate *reg) const
	Add the register.

void	RemoveRegistrator (MbRegDuplicate *reg) const
	Remove the register.

refcount_t	GetUseCount () const
	Get count of references (get count of owners of an object).

refcount_t	AddRef () const
	Increase count of references by one.

refcount_t	DecRef () const
	Decrease count of references by one.

refcount_t	Release () const
	Decrease count of references by one and if count of references became zero, then remove itself.

Public Member Functions inherited from TapeBase
	TapeBase (RegistrableRec regs=noRegistrable)
	Constructor.

	TapeBase (const TapeBase &)
	Copy-constructor.

virtual	~TapeBase ()
	Destructor.

RegistrableRec	GetRegistrable () const
	Whether the stream class is registrable.

void	SetRegistrable (RegistrableRec regs=registrable) const
	Set the state of registration of the stream class.

virtual const char *	GetPureName (const VersionContainer &) const
	Get the class name.

virtual bool	IsFamilyRegistrable () const
	Whether the object belongs to a registrable family.

Static Public Member Functions
static MbSpine &	Create (const MbCurve3D &c, bool parallel, bool same, VERSION vers=Math::DefaultMathVersion())
	Constructor by spine curve. More...

static MbSpine *	Create (const MbCurve3D &c, bool same, const MbVector3D &dir, bool parallel, VERSION vers=Math::DefaultMathVersion())
	Constructor by spine curve and a vector of transformation matrix orientation. More...

static MbSpine *	Create (const MbCurve3D &sp, bool sameS, const MbCurve3D &dc, bool sameD, bool parallel, VERSION vers=Math::DefaultMathVersion())
	Constructor by spine curve and a curve of the vector of transformation matrix orientation. More...

static MbSpine *	Create (const MbCurve3D &sp, bool sameS, const MbSurface &surf, const MbCurve *pCrv, VERSION vers)
	Constructor by spine curve on a curve associated with a surface. More...

static MbSpine *	Create (const MbWireFrame &wireFrame, bool same, const MbVector3D *direction, bool parallel, VERSION version)
	Constructor by wireFrame. More...

static MbSpine *	Create (const MbWireFrame &wireFrame, bool same, const MbSurface &surface, const MbCurve *pCurve, VERSION version)
	Constructor by wireFrame. More...

Protected Member Functions
	MbSpine (const MbCurve3D &cur, bool par, bool same, VERSION vers=Math::DefaultMathVersion())
	Constructor by spine curve. More...

	MbSpine (const MbCurve3D &cur, bool same, const MbVector3D &dir, bool par, VERSION vers=Math::DefaultMathVersion())
	Constructor by spine curve and a vector of transformation matrix orientation. More...

	MbSpine (const MbCurve3D &cur, bool same, const MbCurve3D &opt, bool sameO, bool par, VERSION vers=Math::DefaultMathVersion())
	Constructor by spine curve and a curve of the vector of transformation matrix orientation. More...

Protected Member Functions inherited from MbRefItem
	MbRefItem ()
	Constructor without parameters.

Detailed Description

Curvilinear spine for sweep surface.

Curvilinear spine for sweep surface serves for calculation of a spine curve in the local coordinate system at each point.
The local axis 0 is oriented in direction of the curve "curve" tangent.
The local axis 1 is oriented in direction of the vector "direction" or of the curve "optionalCurve".
The local axis 2 complements the local system to the right coordinate system.

Member Enumeration Documentation

◆ LocalAxes

enum MbSpine::LocalAxes

Methods of movement of the local coordinate system along the guide curve "curve".

Enumerator
la_planeParallel	Plane-parallel, preserving the original orientation of the axes.
la_calcDirection	Vector "direction" was calculated by object. Axis 0 is oriented along the tangent of the curve "curve", the axis 1 in the direction of the vector "direction".
la_userDirection	Vector "direction" was sent to conctructor. Axis 0 is oriented along the tangent of the curve "curve", the axis 1 in the direction of the vector "direction".
la_surfaceNormal	The 0 axis is oriented along the tangent curve on the curve surface, the 1 axis is oriented along the normal of the curve surface.
la_optionalCurve	Axis 0 is oriented along the tangent of the curve "curve", the axis 1 in the direction of the curve "optionalCurve".

Constructor & Destructor Documentation

◆ MbSpine() [1/3]

MbSpine::MbSpine	(	const MbCurve3D &	cur,
		bool	par,
		bool	same,
		VERSION	vers = `Math::DefaultMathVersion()`
	)

protected

Constructor by spine curve.

Parameters

[in]	cur	- A spine curve.
[in]	par	- Attribute of parallel translation.
[in]	same	- Attribute of using the original of spine curve instead of its copy.
[in]	vers	- Version of operation.

◆ MbSpine() [2/3]

MbSpine::MbSpine	(	const MbCurve3D &	cur,
		bool	same,
		const MbVector3D &	dir,
		bool	par,
		VERSION	vers = `Math::DefaultMathVersion()`
	)

protected

Constructor by spine curve and a vector of transformation matrix orientation.

Parameters

[in]	cur	- A spine curve.
[in]	same	- Attribute of using the original of spine curve instead of its copy.
[in]	dir	- Vector of transformation matrix orientation.
[in]	par	- Attribute of parallel translation.
[in]	vers	- Version of calculation the local coordinate system.

◆ MbSpine() [3/3]

MbSpine::MbSpine	(	const MbCurve3D &	cur,
		bool	same,
		const MbCurve3D &	opt,
		bool	sameO,
		bool	par,
		VERSION	vers = `Math::DefaultMathVersion()`
	)

protected

Constructor by spine curve and a curve of the vector of transformation matrix orientation.

Parameters

[in]	cur	- A spine curve
[in]	same	- Attribute of using the original of spine curve instead of its copy
[in]	opt	- A curve of the vector of transformation matrix orientation
[in]	sameO	- Attribute of using the original of a curve of the vector of transformation matrix orientation instead of its copy
[in]	par	- Attribute of parallel translation.
[in]	vers	- Version of calculation the local coordinate system.

Member Function Documentation

◆ Create() [1/6]

static MbSpine& MbSpine::Create	(	const MbCurve3D &	c,
		bool	parallel,
		bool	same,
		VERSION	vers = `Math::DefaultMathVersion()`
	)

static

Constructor by spine curve.

Parameters

[in]	c	- A spine curve
[in]	parallel	- Attribute of parallel translation.
[in]	same	- Attribute of using the original of spine curve instead of its copy
[in]	vers	- Version of calculation the local coordinate system.

◆ Create() [2/6]

static MbSpine* MbSpine::Create	(	const MbCurve3D &	c,
		bool	same,
		const MbVector3D &	dir,
		bool	parallel,
		VERSION	vers = `Math::DefaultMathVersion()`
	)

static

Constructor by spine curve and a vector of transformation matrix orientation.

Parameters

[in]	c	- A spine curve
[in]	same	- Attribute of using the original of spine curve instead of its copy
[in]	direction	- Vector of transformation matrix orientation.
[in]	parallel	- Attribute of parallel translation.
[in]	vers	- Version of calculation the local coordinate system.

Returns: Returns pointer to the created object or null pointer in case of failure.

◆ Create() [3/6]

static MbSpine* MbSpine::Create	(	const MbCurve3D &	sp,
		bool	sameS,
		const MbCurve3D &	dc,
		bool	sameD,
		bool	parallel,
		VERSION	vers = `Math::DefaultMathVersion()`
	)

static

Constructor by spine curve and a curve of the vector of transformation matrix orientation.

Parameters

[in]	sp	- A spine curve
[in]	sameS	- Attribute of using the original of spine curve instead of its copy
[in]	dc	- A curve of the vector of transformation matrix orientation
[in]	sameD	- Attribute of using the original of a curve of the vector of transformation matrix orientation instead of its copy
[in]	parallel	- Attribute of parallel translation.
[in]	vers	- Version of calculation the local coordinate system.

Returns: Returns pointer to the created object or null pointer in case of failure.

◆ Create() [4/6]

static MbSpine* MbSpine::Create	(	const MbCurve3D &	sp,
		bool	sameS,
		const MbSurface &	surf,
		const MbCurve *	pCrv,
		VERSION	vers
	)

static

Constructor by spine curve on a curve associated with a surface.

Constructor by spine curve and the surface on which the spine curve lies.

Parameters

[in]	sp	- A spine curve
[in]	sameS	- Attribute of using the original of spine curve instead of its copy
[in]	surf	- The surface of the sp, it should be curve on surface.
[in]	pCrv	- The two-dimensional curve on the surface of the guide curve.
[in]	vers	- Version of calculation the local coordinate system.

Returns: Returns pointer to the created object or null pointer in case of failure.

◆ Create() [5/6]

static MbSpine* MbSpine::Create	(	const MbWireFrame &	wireFrame,
		bool	same,
		const MbVector3D *	direction,
		bool	parallel,
		VERSION	version
	)

static

Constructor by wireFrame.

Parameters

[in]	wireFrame	- Wire frame with a spine curve.
[in]	same	- Attribute of using the original of spine curve instead of its copy
[in]	direction	- Vector of transformation matrix orientation.
[in]	parallel	- Attribute of parallel translation.
[in]	version	- Version of calculation the local coordinate system.

Returns: Returns pointer to the created object or null pointer in case of failure.

◆ Create() [6/6]

static MbSpine* MbSpine::Create	(	const MbWireFrame &	wireFrame,
		bool	same,
		const MbSurface &	surface,
		const MbCurve *	pCurve,
		VERSION	version
	)

static

Constructor by wireFrame.

Parameters

[in]	wireFrame	- A spine curve
[in]	same	- Attribute of using the original of spine curve instead of its copy
[in]	surface	- The surface of the sp, it should be curve on surface.
[in]	pCurve	- The two-dimensional curve on the surface of the guide curve.
[in]	version	- Version of calculation the local coordinate system.

Returns: Returns pointer to the created object or null pointer in case of failure.

◆ TransformMatrix()

void MbSpine::TransformMatrix	(	double	v,
		MbMatrix3D &	matrix
	)		const

Determination of a transfer matrix for generatrix.

Parameters

[in]	v	- Parameter on spine curve
[out]	matrix	- The result is a matrix

◆ MoveVector()

void MbSpine::MoveVector	(	double &	v,
		MbVector3D &	vect
	)		const

Determination of a transfer vector for generatrix.

Parameters

[in]	v	- Parameter on spine curve
[out]	vect	- The result is a vector

◆ GetOrt0()

const MbVector3D& MbSpine::GetOrt0 ( ) const

inline

The first vector of basis in the calculated spine.

Returns: A vector

◆ CalculateMatrix()

void MbSpine::CalculateMatrix	(	double &	v,
		bool	ext,
		MbMatrix3D &	matrix0,
		MbMatrix3D &	matrix1,
		MbMatrix3D &	matrix2
	)		const

Calculation of transformation matrices.

Calculation of transformation matrices for radius vector (matrix0) and for first and second derivatives (matrix1, matrix2) for the parameter on a spine. The function moves the parameter v inside the spine curve domain when ext==true.

Parameters

[in,out] v - Parameter on spine curve

◆ GetPlacement()

MbPlacement3D MbSpine::GetPlacement ( double v ) const

Construct placement in the given point.

Parameters

[in] v - Parameter on spine curve

◆ PrepareWrite()

void MbSpine::PrepareWrite ( ) const

inline

Function of registration by the number of references to avoid multiple writing.

The documentation for this class was generated from the following file:

surf_spine.h

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Detailed Description

Member Enumeration Documentation

◆ LocalAxes

Constructor & Destructor Documentation

◆ MbSpine() [1/3]

◆ MbSpine() [2/3]

◆ MbSpine() [3/3]

Member Function Documentation

◆ Create() [1/6]

◆ Create() [2/6]

◆ Create() [3/6]

◆ Create() [4/6]

◆ Create() [5/6]

◆ Create() [6/6]

◆ TransformMatrix()

◆ MoveVector()

◆ GetOrt0()

◆ CalculateMatrix()

◆ GetPlacement()

◆ PrepareWrite()