action_sheet.h File Reference

Functions for operating with a sheet metal solid. More...

#include <templ_sptr.h>
#include <mb_operation_result.h>
#include <cur_contour_on_plane.h>
#include <cur_plane_curve.h>
#include <cr_stamp_remove_solid.h>
#include <sheet_metal_param.h>
#include <topology_faceset.h>

Classes
class	MbJointBendUtils
	Auxiliary functions for a composite bend (a bend from a sketch). More...
class	MbBeadParamCalculator
	The calculator of the dependent parameter of a bead. More...
class	MbKCalculator
	Calculator of the neutral layer coefficient. More...
class	MbDisplacementCalculator
	The bend displacement calculator. More...
class	MbJalousieParamCalculator
	The calculator of trimmed jalousie parameters. More...
class	MbCloseCornerGapHotPointCalc
	Calculator of hot point location for the gap of corner closure. More...
class	MbRuledShellGapCalc
	Calculator of hot point location for the gap of corner closure. More...
class	MbSheetRibHotPointCalculator
	Calculator of hot point location for the sheet rib. More...

Enumerations
enum	MbeSegmentationMethod { sm_Quantity , sm_Length , sm_Angle , sm_Height }
	The method of contour segmentation. More...
enum	MbeBendWidthType { bwt_KFactor , bwt_Allowance , bwt_Deduction , bwt_Table }
	The method of bend width definition. More...

Functions
MbResultType	BendSheetSolidOverSegment (MbSolid &solid, MbeCopyMode sameShell, const RPArray< MbFace > &bendingFaces, MbCurve3D &curve, bool unbended, const MbBendOverSegValues &params, const MbSNameMaker &nameMaker, MbSolid *&result)
	The bend of a sheet solid along a line. More...
MbResultType	SheetSolidJog (MbSolid &solid, MbeCopyMode sameShell, const RPArray< MbFace > &bendingFaces, MbCurve3D &curve, bool unbended, const MbJogValues &jogParams, const MbBendValues &secondBendParams, const MbSNameMaker &nameMaker, RPArray< MbFace > &firstBendFaces, RPArray< MbFace > &secondBendFaces, MbSolid *&result)
	A jog. More...
MbResultType	BendSheetSolid (MbSolid &solid, MbeCopyMode sameShell, const RPArray< MbSheetMetalBend > &bends, const MbFace &fixedFace, const MbCartPoint &fixedPoint, const MbSNameMaker &nameMaker, MbSolid *&result)
	Rebend the sheet solid bends. More...
MbResultType	UnbendSheetSolid (MbSolid &solid, MbeCopyMode sameShell, const RPArray< MbSheetMetalBend > &bends, const MbFace &fixedFace, const MbCartPoint &fixedPoint, const MbSNameMaker &nameMaker, MbSolid *&result, RPArray< MbContour3D > *ribContours=nullptr)
	Unbend the bends of a sheet solid. More...
MbResultType	CreateSheetSolid (const MbPlacement3D &placement, RPArray< MbContour > &contours, bool unbended, const MbSheetMetalValues &params, RPArray< MbSNameMaker > *nameMakers, RPArray< MbSMBendNames > &resultBends, MbSolid *&result)
	Create a sheet solid. More...
MbResultType	SheetSolidPlate (MbSolid &solid, MbeCopyMode sameShell, const MbPlacement3D &placement, RPArray< MbContour > &contours, const MbSheetMetalValues &params, RPArray< MbSNameMaker > *nameMakers, MbSolid *&result)
	Addition of a plate to the sheet solid. More...
MbResultType	SheetSolidHole (MbSolid &solid, MbeCopyMode sameShell, const MbPlacement3D &placement, RPArray< MbContour > &contours, const MbSheetMetalValues &params, bool diff, RPArray< MbSNameMaker > *nameMakers, MbSolid *&result)
	Create a hole in a sheet solid. More...
MbResultType	BendSheetSolidByEdges (const c3d::SolidSPtr &solid, const MbeCopyMode sameShell, const MbBendSheetSolidByEdgesParams &params, std::vector< MbSMBendNames * > &bends, c3d::SolidSPtr &resultSolid)
	A bend on an edge. More...
MbResultType	BendSheetSolidByEdges (MbSolid &solid, const MbeCopyMode sameShell, const RPArray< MbCurveEdge > &edges, const bool unbended, const MbBendByEdgeValues &params, const MbSNameMaker &nameMaker, RPArray< MbSMBendNames > &resultBends, MbSolid *&result)
	A bend on an edge. More...
MbResultType	SheetSolidJointBend (const c3d::SolidSPtr &solid, const MbeCopyMode sameShell, const MbSheetSolidJointBendParams &params, std::vector< std::vector< MbSMBendNames * >> &bends, c3d::SolidSPtr &resultSolid)
	A composite bend of a sheet solid. More...
MbResultType	SheetSolidJointBend (MbSolid &solid, const MbeCopyMode sameShell, const MbPlacement3D &placement, const MbContour &contour, const RPArray< MbCurveEdge > &edges, const bool unbended, const MbJointBendValues &params, const MbSNameMaker &nameMaker, RPArray< RPArray< MbSMBendNames > > &resultBends, MbSolid *&result)
	A composite bend of a sheet solid. More...
MbResultType	CloseCorner (MbSolid &solid, MbeCopyMode sameShell, MbCurveEdge *curveEdgePlus, MbCurveEdge *curveEdgeMinus, const MbClosedCornerValues &params, const MbSNameMaker &nameMaker, MbSolid *&result)
	A corner enclosure. More...
MbResultType	CutSolidArrayByBorders (MbSolid &solidArray, const MbeCopyMode sameShells, const MbCutSolidArrayByBordersParams &params, c3d::SolidSPtr &resultSolid)
	Cutting the solidArray with contours of plane sheet faces of sheetSolid form params. More...
MbResultType	CreateStampParts (const MbStampPartsParams &params, MbStampPartsResult &resultSolids)
	Creation of stamping's components. More...
MbResultType	CreateStampWithToolSolidParts (const c3d::SolidSPtr &solid, MbeCopyMode sameShell, const c3d::SolidSPtr &toolSolid, MbeCopyMode sameShellTool, const MbStampWithToolPartsParams &params, MbStampWithToolPartsResult &resultSolids)
	Stamping with a tool solid (punch or die). More...
MbResultType	NormalizeCutSides (MbSolid &solid, MbeCopyMode sameShell, const MbNormalizeCutSidesParams &normParam, c3d::SolidSPtr &result)
	Normalize cut sides of the sheet solid. More...
MbResultType	Stamp (const c3d::SolidSPtr &solid, MbeCopyMode sameShell, const MbStampParams &params, c3d::SolidSPtr &result)
	Stamping. More...
MbResultType	StampWithToolSolid (const c3d::SolidSPtr &solid, MbeCopyMode sameShell, const c3d::SolidSPtr &toolSolid, MbeCopyMode sameShellTool, const MbStampWithToolParams &params, c3d::SolidSPtr &result)
	Stamping with a tool solid (punch or die). More...
MbResultType	CreateSphericalStampParts (const MbSphericalStampPartsParams &params, MbSphericalStampPartsResult &resultSolids)
	Creation of spherical stamping's components. More...
MbResultType	SphericalStamp (const c3d::SolidSPtr &solid, MbeCopyMode sameShell, const MbSphericalStampParams &params, c3d::SolidSPtr &result)
	Spherical stamping. More...
MbResultType	CreateBeadParts (const MbFace *face, const MbPlacement3D &placement, const RPArray< MbContour > &contours, const SArray< MbCartPoint > &centers, const MbBeadValues &params, const double thinkness, const MbSNameMaker &nameMaker, MbSolid *&partToAdd, MbSolid *&partToSubtract)
	Creation of bead's components. More...
MbResultType	CreateBead (MbSolid &solid, MbeCopyMode sameShell, const MbFace &face, const MbPlacement3D &placement, const RPArray< MbContour > &contours, const SArray< MbCartPoint > &centers, const MbBeadValues &params, const MbSNameMaker &nameMaker, MbSolid *&result)
	A bead. More...
MbResultType	CreateJalousieParts (const MbFace *face, const MbPlacement3D &placement, const RPArray< MbLineSegment > &segments, const MbJalousieValues &params, const double thickness, const MbSNameMaker &nameMaker, MbSolid *&partToAdd, MbSolid *&partToSubtract)
	Creation of jalousie's components. More...
MbResultType	CreateJalousie (MbSolid &solid, MbeCopyMode sameShell, const MbFace &face, const MbPlacement3D &placement, const RPArray< MbLineSegment > &segments, const MbJalousieValues &params, const MbSNameMaker &nameMaker, MbSolid *&result)
	Jalousie. More...
MbResultType	CreateRuledSolid (MbRuledSolidValues &parameters, const MbSNameMaker &nameMaker, RPArray< MbSMBendNames > &resultBends, MbContour *&resultContour, MbSolid *&resultSolid)
	A ruled shell from a contour. More...
MbResultType	SheetSolidUnion (MbSolid &solid1, const MbeCopyMode sameShell1, MbSolid &solid2, const MbeCopyMode sameShell2, const MbSNameMaker &names, MbSolid *&result)
	A union of sheet solids by a side face. More...
bool	CanUnionSheetSolids (const MbSolid &solid1, const MbSolid &solid2)
	Checks that solids are sheet and they can be connected by a side face. More...
MbResultType	RestoreSideEdges (MbSolid &solid, MbeCopyMode sameShell, const RPArray< MbFace > &outerFaces, const bool strict, RPArray< MbSheetMetalBend > &bends, const MbSNameMaker &nameMaker, MbSolid *&result)
	Restore the side edges of the bends. More...
bool	SeparateBendsBySubshells (const MbSolid &solid, const RPArray< MbSheetMetalBend > &bends, const MbName &fixedFaceName, RPArray< RPArray< MbSheetMetalBend > > &bendsGroups, RPArray< const MbFace > &fixedFaces)
	Disjoint the bends by the common subshells. More...
bool	CollectBends (const MbFaceShell &faceShell, const RPArray< MbFace > &innerFaces, const RPArray< MbFace > &outerFaces, RPArray< MbSheetMetalBend > &result)
	Collect the pairs of faces of the bends. More...
bool	IsSuitableForFixed (const MbFace &face)
	Determine whether a face can be chosen as a fixed face for bending/unbending. More...
void	FindCurveFaces (const RPArray< MbFace > &faces, const MbCurve3D &curve, RPArray< MbFace > &result)
	Find the faces containing the specified curve. More...
MbFace *	FindSheetFace (const MbCurveEdge &edge)
	Find the upper/lower face of a sheet solid that contains the specified edge. More...
MbFace *	FindPairBendFace (const MbFace &face)
	Find the pair face of a bend. More...
MbFace *	GetPairPlanarFaceByEdge (const MbCurveEdge &curveEdge, const double begDistance, const double endDistance)
	Find a planar pair sheet face given en edge. More...
MbFace *	GetPairPlanarFaceByCurve (const MbFace &sheetFace, const MbCurve3D &curve)
	Find a planar pair sheet face given a three-dimensional curve. More...
MbFace *	GetPairPlanarFaceByContour (const MbFaceShell &shell, const MbFace &sheetFace, const MbPlacement3D &place, const RPArray< const MbCurve > &segments)
	Find a planar pair sheet face given a contour. More...
MbFace *	GetPairPlanarFace (const MbFaceShell *faceShell, const MbFace &sheetFace)
	Find the planar pair sheet face. More...
double	GetDistanceIfSameAndOpposite (const MbFace &face1, const MbFace *face2)
	Compute the distance between faces. More...
void	GetSimilarCylindricBends (const MbFaceShell &shell, RPArray< MbSheetMetalBend > &bends)
	Find the similar bends. More...
bool	CalculateTangentPoint (const MbFace &face, const MbPlane &plane, MbCartPoint &tangentPoint)
	Compute a tangent point for bend/unbend. More...
bool	CalculateConicAxisLine (const MbFace &face, MbLineSegment &axisLineSegment)
	Calculate the centerline of an unbended conic bend. More...
bool	BuildBends3DCenterlines (const MbBends3DLinesParams &params, MbBends3DLinesResult &result)
	Calculate the centerlines of unfolded bends. More...
bool	GetParamsForCloseCorner (const MbCloseCornerParams &params, MbCloseCornerResults &result)
	Calculate the parameters for the corner closure. More...
double	CalculateSegmentationParameter (const MbCurve &curve, const MbeSegmentationMethod method, const double param, const MbeSegmentationMethod newMethod)
	Calculate parameter of segmentation. More...
MbResultType	SplitContourIntoSegments (const MbCurve &curve, const size_t segmNumber, MbContour *&resultContour)
	Split every arc of the contour into segments. More...
MbResultType	SplitContoursIntoSegments (MbContour &contour1, SArray< double > &breaks1, MbContour &contour2, SArray< double > &breaks2, MbSNameMaker &names, const SArray< size_t > &segmNumbers1, const SArray< size_t > &segmNumbers2, const size_t defSegmNumb, const double gapValue)
	Split a part of a contours (an arc) into segments. More...
bool	FillBendNamesArray (const MbContour &contour1, const MbPlacement3D &placement1, const SArray< double > &breaks1, const MbContour &contour2, const MbPlacement3D &placement2, const SArray< double > &breaks2, const MbSNameMaker &nameMaker, RPArray< MbSMBendNames > &bendNames)
	Fill the array of MbSMBendNames. More...
MbContour3D *	MakeContour (const MbPlacement3D &placement, const MbContour &contour, const SArray< double > &breaks, MbSNameMaker &names)
	To create 3D contour by 2D contour with splitting. More...
bool	MakeSheetRiContourByTwoSides (const MbCurveEdge &bendEdge, const double bendAngle, const double l1, const double l2, const double bRatio, const double rad, const bool dir, const double t, MbPlacement3D &placement, MbContour &contour, double &bMax)
	Create the contour of rib by side distances. More...
bool	MakeSheetRiContourBySideAndAngle (const MbCurveEdge &bendEdge, const double bendAngle, const double l1, const double a, const double bRatio, const double rad, const bool dir, const double t, MbPlacement3D &placement, MbContour &contour, double &bMax)
	Create the contour of rib by distance and slope angle. More...
bool	MakeSheetRiContourByDepthAndAngle (const MbCurveEdge &bendEdge, const double bendAngle, const double h, const double a, const double bRatio, const double rad, const bool dir, const double t, MbPlacement3D &placement, MbContour &contour, double &bMax)
	Create the contour of rib by depth and slope angle. More...
MbResultType	SheetRibParts (const c3d::SolidSPtr &solid, MbeCopyMode sameShell, const MbSheetRibSolidParams &params, c3d::SolidSPtr &partToAdd, c3d::SolidSPtr &partToSubtract)
	Create rib parts of a sheet solid. More...
MbResultType	SheetRibSolid (const c3d::SolidSPtr &solid, MbeCopyMode sameShell, const MbSheetRibSolidParams &params, c3d::SolidSPtr &result)
	Create a sheet solid with rib. More...
MbResultType	BendAnySolid (MbSolid &solid, const MbeCopyMode sameShell, const MbPlane &cutPlane, const SArray< MbAnyBend > &bends, const MbSNameMaker &nameMaker, MbSolid *&result)
	Cut the solid with the cutting planes and bend the resulting parts according to given parameters. More...
MbResultType	SimplifyFlatPattern (MbSolid &solid, const MbeCopyMode sameShell, const MbSimplifyFlatPatternValues &params, const MbSNameMaker &nameMaker, MbSolid *&result)
	Simplify flattened sheet solid. More...
MbResultType	RemoveOperationResult (MbSolid &solid, const MbeCopyMode sameShell, const MbRemoveOperationResultParams &params, SPtr< MbSolid > &result)
	Remove the result operation with name "removeName". More...
MbResultType	ConvertSolidToSheetMetal (c3d::SolidSPtr &solid, const MbeCopyMode sameShell, MbSolidToSheetMetalParams &parameters, c3d::SolidSPtr &result)
	Construct sheet metal solid based on an arbitrary solid. More...

Detailed Description

Functions for operating with a sheet metal solid.