This is the complete list of members for MbCurveEdge, including all inherited members.

AddAttribute(MbAttribute *attr, bool checkSame=true, bool forcedAssign=false)	MbAttributeContainer
AddAttribute(const MbAttribute &attr, bool checkSame=true, bool forcedAssign=false)	MbAttributeContainer
AddRef() const	MbRefItem
AddRegistrator(MbRegDuplicate *reg) const	MbRefItem
AddYourGabaritTo(MbCube &) const override	MbEdge	virtual
AdvanceUserAttrib(const MbUserAttribute &)	MbAttributeContainer	static
AngleWithEdge(const MbEdge &, double &angle) const	MbEdge
Assign(const MbTopologyItem &)	MbTopologyItem	inline
AttributesAssign(const MbAttributeContainer &src, bool forcedAssign=false)	MbAttributeContainer
AttributesChange()	MbAttributeContainer
AttributesConvert(MbAttributeContainer &other) const	MbAttributeContainer
AttributesCopy(MbAttributeContainer &other, MbRegDuplicate *=nullptr) const	MbAttributeContainer
AttributesCount() const	MbAttributeContainer	inline
AttributesDelete()	MbAttributeContainer
AttributesMerge(MbAttributeContainer &other)	MbAttributeContainer
AttributesMove(const MbVector3D &, MbRegTransform *=nullptr)	MbAttributeContainer
AttributesRead(reader &)	MbAttributeContainer
AttributesReplace(MbAttributeContainer &other)	MbAttributeContainer
AttributesRotate(const MbAxis3D &, double angle, MbRegTransform *=nullptr)	MbAttributeContainer
AttributesSplit(const std::vector< MbAttributeContainer * > &others)	MbAttributeContainer
AttributesTransform(const MbMatrix3D &, MbRegTransform *=nullptr)	MbAttributeContainer
AttributesWrite(writer &) const	MbAttributeContainer
begVertex	MbEdge	protected
CalculateLocalGabarit(const MbMatrix3D &into, MbCube &cube) const override	MbEdge	virtual
CalculateMesh(const MbStepData &stepData, const MbFormNote &note, MbMesh &mesh) const override	MbEdge	virtual
ChangeCarrierBorne(const MbSurface &item, MbSurface &init, const MbMatrix &matr)	MbCurveEdge
ChangeCurve(MbCurve3D &crv) override	MbCurveEdge	virtual
ChangeIntersectionCurve(MbSurfaceIntersectionCurve &crv, bool sense)	MbCurveEdge
ChangeSurface(const MbSurface &oldSurf, MbSurface &newSurf, bool faceSense, bool orient)	MbCurveEdge
ChooseCurve(const MbSurface &surf, bool faceSense, bool orient) const	MbCurveEdge
ChooseCurve(const MbFace *face, bool orient) const	MbCurveEdge
ConvexoConcaveCutting(RPArray< MbCurveEdge > &edges, VERSION version)	MbCurveEdge
CopyOwnChanged(const MbTopologyItem &ti)	MbTopologyItem	inline
CopyReadyMutable(const MbCurveEdge &e)	MbCurveEdge
curve	MbEdge	protected
CurveSection(const MbPlacement3D &place, SArray< MbCartPoint > &points, RPArray< MbCurve > &pCurve) const	MbCurveEdge
CutPeriodicEdge(const MbVector3D &eye, SSArray< double > &trimParams, double &delT1, double &delT2) const	MbCurveEdge
CuttingEdge(double t, bool beginSafe, const MbSurface *surface)	MbCurveEdge
CuttingEdge(SArray< double > &params, bool beginSafe, double eps, const MbSurface *surface, RPArray< MbCurveEdge > &edges)	MbCurveEdge
CuttingEdge(SArray< double > &params, bool beginSafe, double eps, const MbSurface *surface, c3d::EdgesSPtrVector &edges)	MbCurveEdge
DataDuplicate(MbRegDuplicate *=nullptr) const override	MbCurveEdge	virtual
DecRef() const	MbRefItem
DeleteOrientedEdges()	MbCurveEdge
DetachSimpleAttribute(MbeAttributeType)	MbAttributeContainer
DetachUserAttributes(std::vector< MbUserAttribute * > &attrs, const MbUserAttribType &type)	MbAttributeContainer
DistanceToEdge(const MbEdge &edge, MbCartPoint3D &p0, MbCartPoint3D &p1) const	MbEdge
DistanceToFace(const MbFace &face, MbCartPoint3D &p0, MbCartPoint3D &p1) const	MbEdge
DistanceToPoint(const MbCartPoint3D &) const override	MbEdge	virtual
DistanceToSurface(const MbSurface &surf, MbCartPoint3D &p0, MbCartPoint3D &p1) const	MbEdge
EdgeNormal(double t, MbVector3D &p) const	MbCurveEdge
endVertex	MbEdge	protected
faceMinus	MbCurveEdge	protected
FaceNormal(double t, MbVector3D &n, bool plus) const	MbCurveEdge
FaceNormal(const MbSurface &surf, bool faceSense, double t, MbVector3D &p) const	MbCurveEdge
facePlus	MbCurveEdge	protected
FacesAngle(double t) const	MbCurveEdge
FindOrientedEdge(bool orient, const MbFace face, MbLoop &findLoop, size_t &index) const	MbCurveEdge
FindOrientedEdgeMinus(size_t &loopIndex, MbLoop *&findLoop, size_t &index) const	MbCurveEdge
FindOrientedEdgePlus(size_t &loopIndex, MbLoop *&findLoop, size_t &index) const	MbCurveEdge
GetAttributes(c3d::AttrVector &attrs, MbeAttributeType aFamily, MbeAttributeType subType) const	MbAttributeContainer
GetAttributes(c3d::AttrVector &attrs, MbeAttributeType aType) const	MbAttributeContainer
GetAttributes(AttrVector &attrs) const	MbAttributeContainer	inline
GetBegPoint(MbCartPoint3D &p) const	MbEdge	inline
GetBegTangent(MbVector3D &v) const	MbEdge	inline
GetBegVertex() const	MbEdge	inline
GetBegVertexPoint(MbCartPoint3D &cp) const	MbEdge	inline
GetBegVertexPointer() const	MbEdge	inline
GetBuildType() const	MbCurveEdge
GetColor() const	MbAttributeContainer
GetCommonAttributes(c3d::AttrVector &, const c3d::string_t &samplePrompt, MbeAttributeType subType=at_Undefined, bool firstFound=false) const	MbAttributeContainer
GetConnectedEdges(bool begin, RPArray< MbCurveEdge > &edges, SArray< bool > &orients, VERSION version=Math::DefaultMathVersion()) const	MbCurveEdge
GetCurve() const	MbEdge	inline
GetCurveParam(double w) const	MbEdge
GetDensity() const	MbAttributeContainer
GetEdgeParam(double t) const	MbEdge
GetEndPoint(MbCartPoint3D &p) const	MbEdge	inline
GetEndTangent(MbVector3D &v) const	MbEdge	inline
GetEndVertex() const	MbEdge	inline
GetEndVertexPoint(MbCartPoint3D &cp) const	MbEdge	inline
GetEndVertexPointer() const	MbEdge	inline
GetFace(size_t i) const	MbCurveEdge	inline
GetFaceMinus() const	MbCurveEdge	inline
GetFacePlus() const	MbCurveEdge	inline
GetFirstName() const	MbTopologyItem	inline
GetIntersectionCurve() const	MbCurveEdge	inline
GetLabel(void *key=nullptr) const	MbTopologyItem	inline
GetLengthEvaluation() const	MbEdge
GetLimitParam(bool beg, MbCartPoint &pPlus, MbCartPoint &pMinus, double &t) const	MbCurveEdge
GetMainName() const	MbTopologyItem	inline
GetMetricLength() const	MbEdge
GetMiddleDerive(MbVector3D &) const	MbEdge
GetMoveVector(const MbSurface &surf, bool faceSense, bool orient, MbVector &to) const	MbCurveEdge
GetName() const	MbTopologyItem	inline
GetNameHash() const	MbTopologyItem	inline
GetOutTraverse(const MbFace &face, bool plus, double t, double metricStep, MbCartPoint3D &q0, MbVector3D &outv, MbCartPoint &p0, MbVector &tv, bool &out) const	MbCurveEdge
GetOwnChanged() const	MbTopologyItem	inline
GetOwnChanged(MbeChangedType n) const	MbTopologyItem	inline
GetOwnChangedFlag() const	MbTopologyItem	inline
GetProjection(const MbPlacement3D &, VERSION version) const	MbEdge
GetProlongEdges(RPArray< MbCurveEdge > &edges) const	MbCurveEdge
GetProperties(MbProperties &)	MbCurveEdge
GetPureName(const VersionContainer &) const	TapeBase	virtual
GetRegistrable() const	TapeBase
GetSimpleAttribute(MbeAttributeType) const	MbAttributeContainer
GetSpaceCurve() const	MbCurveEdge
GetStringAttributes(c3d::AttrVector &, const c3d::string_t &sampleContent) const	MbAttributeContainer
GetStyle() const	MbAttributeContainer
GetTBegVertex() const	MbEdge
GetTEndVertex() const	MbEdge
GetTMaxVertex() const	MbEdge	inline
GetTMinVertex() const	MbEdge	inline
GetTolerance() const	MbCurveEdge
GetTraverses(const MbFace face, const MbFace other, bool plus, double t, double paramStep, double metricStep, MbCartPoint &p0, MbTwoTraverses &traverses, VERSION version=Math::DefaultMathVersion()) const	MbCurveEdge
GetUseCount() const	MbRefItem
GetUserAttributes(std::vector< MbUserAttribute * > &attrs, const MbUserAttribType &type) const	MbAttributeContainer
GetVertex(size_t i) const	MbEdge	inline
GetVerticesArray(RPArray< MbVertex > &)	MbEdge
GetVerticesArray(RPArray< const MbVertex > &) const	MbEdge
GetVisual(float &a, float &d, float &sp, float &sh, float &t, float &e, uint rgb=0) const	MbAttributeContainer
GetWidth() const	MbAttributeContainer
ImplicationType() const override	MbTopologyItem	virtual
IsA() const override	MbCurveEdge	virtual
IsAFace() const	MbTopItem	inline
IsAnEdge() const	MbTopItem	inline
IsAProxy() const	MbTopItem	inline
IsAShell() const	MbTopItem	inline
IsAVertex() const	MbTopItem	inline
IsAWireEdge() const	MbTopItem	inline
IsBoundaryFace(double mEps=Math::metricEpsilon) const	MbCurveEdge
IsChanged() const	MbAttributeContainer
IsClosed() const	MbEdge
IsColinear(const MbPlacement3D &p, double epsilon=Math::angleRegion) const	MbEdge
IsColored() const	MbAttributeContainer	inline
IsConnectedWith(const MbEdge &edge) const	MbEdge
IsConvex(double angleEps=EXTENT_EPSILON, const MbRect1D *tRange=nullptr) const	MbCurveEdge
IsCurveOneOnFacePlus() const	MbCurveEdge
IsFamilyRegistrable() const	TapeBase	virtual
IsInvisible() const	MbAttributeContainer
IsOwnChangedWeakly() const	MbTopologyItem	inline
IsOwnRenamedOnly() const	MbTopologyItem	inline
IsOwnReorientedOnly() const	MbTopologyItem	inline
IsOwnTransformedOnly() const	MbTopologyItem	inline
IsPole(VERSION version=Math::DefaultMathVersion()) const	MbCurveEdge
IsSame(const MbTopologyItem &, double accuracy) const override	MbCurveEdge	virtual
IsSameSense() const	MbEdge	inline
IsSeam() const	MbCurveEdge
IsSelected() const	MbAttributeContainer
IsSmooth(double epsilon=Math::paramPrecision) const	MbCurveEdge
IsSplit(bool strict=false) const	MbCurveEdge
IsStraight(bool ignoreParams=false) const	MbEdge
IsTolerant() const	MbCurveEdge
IsUsual(bool tolerantIsUsual) const	MbCurveEdge
IsVertexOn(const MbVertex *vertex) const	MbEdge	inline
IsVisible() const	MbAttributeContainer
MakeBoundaryCurve()	MbCurveEdge
MakeCurve() const	MbCurveEdge
MbAttributeContainer(const MbAttributeContainer &, MbRegDuplicate *)	MbAttributeContainer	protected
MbAttributeContainer()	MbAttributeContainer
MbAttributeContainer(MbAttribute &)	MbAttributeContainer
MbCurveEdge(const MbCurveEdge &, MbRegDuplicate *iReg)	MbCurveEdge	protected
MbCurveEdge(const MbVertex &beg, const MbVertex &end, const MbSurfaceIntersectionCurve &initCurve, bool sense)	MbCurveEdge
MbCurveEdge(const MbVertex beg, const MbVertex end, const MbSurfaceIntersectionCurve &initCurve, bool sense)	MbCurveEdge
MbCurveEdge(const MbSurfaceIntersectionCurve &, bool sense)	MbCurveEdge
MbCurveEdge(const MbCurveEdge &other, const MbSurfaceIntersectionCurve &newCurve)	MbCurveEdge
MbEdge(const MbEdge &init, MbRegDuplicate *iReg)	MbEdge	protected
MbEdge(const MbCurve3D &initCurve, bool sense, const MbVertex &beg, const MbVertex &end)	MbEdge
MbEdge(const MbCurve3D &initCurve, bool sense, const MbVertex beg, const MbVertex end)	MbEdge
MbEdge(const MbCurve3D &initCurve, bool sense)	MbEdge
MbEdge(const MbEdge &other, const MbCurve3D &newCurve)	MbEdge
MbRefItem()	MbRefItem	protected
MbTopItem()	MbTopItem	protected
MbTopologyItem()	MbTopologyItem	protected
MbTopologyItem(const MbTopologyItem &, MbRegDuplicate *)	MbTopologyItem	protected
MergeEdges(MbEdge &edge2, bool begin1, bool begin2, const MbSNameMaker &snMaker, double precision) override	MbCurveEdge	virtual
MergeEdges(MbCurveEdge &edge2, bool begin1, bool begin2, const MbSNameMaker &snMaker, double precision=Math::paramNear)	MbCurveEdge
Move(const MbVector3D &, MbRegTransform *=nullptr) override	MbEdge	virtual
MoveBy(const MbSurface &surf, bool faceSense, bool orient, const MbVector &to)	MbCurveEdge
Point(double t, MbCartPoint3D &) const	MbEdge
PointBy(const MbSurface &surf, bool faceSense, bool orient, double t, MbCartPoint &p) const	MbCurveEdge
PointOn(const MbSurface &surf, bool faceSense, bool orient, double &t, MbCartPoint &p) const	MbCurveEdge
PointOn(const MbFace *face, bool orient, double &t, MbCartPoint &p) const	MbCurveEdge
PointProjection(const MbCartPoint3D &) const	MbEdge
PointProjection(const MbCartPoint3D &p0, MbCartPoint3D &pOnEdge, double &distance) const	MbEdge
PrepareWrite() const	MbTopItem	inline
ProlongEdge(double &t, bool begin, double deviateAngle, const VERSION version, double eps=Math::paramNear)	MbCurveEdge
ReduceUserAttrib(const MbExternalAttribute &)	MbAttributeContainer	static
RefType() const override	MbTopItem	virtual
Release() const	MbRefItem
RemoveAttribute(const MbAttribute *, bool checkAccuracySame=false, double accuracy=LENGTH_EPSILON)	MbAttributeContainer
RemoveAttributes(bool onDeleteOwner=false)	MbAttributeContainer
RemoveAttributes(MbeAttributeType type, MbeAttributeType subType)	MbAttributeContainer
RemoveParentNamesAttribute()	MbTopologyItem
RemovePrivateLabel(void *key=nullptr) const	MbTopologyItem	inline
RemovePrivateLabelThrough(void *key) const	MbEdge
RemoveRegistrator(MbRegDuplicate *reg) const	MbRefItem
RemoveSimpleAttribute(MbeAttributeType)	MbAttributeContainer
RemoveUserAttributes(const MbUserAttribType &type)	MbAttributeContainer
ResetLabelCacheUse()	MbTopologyItem	inlinestatic
Reverse() override	MbCurveEdge	virtual
ReverseSelected()	MbAttributeContainer
Rotate(const MbAxis3D &, double angle, MbRegTransform *=nullptr) override	MbEdge	virtual
sameSense	MbEdge	protected
SetBegVertex()	MbEdge	inline
SetBegVertex(const MbVertex &ver)	MbEdge
SetBegVertexPointer()	MbEdge	inline
SetChanged(bool c=true)	MbAttributeContainer
SetColor(uint32)	MbAttributeContainer
SetColor(int R, int G, int B)	MbAttributeContainer
SetCurve()	MbEdge	inline
SetDensity(double)	MbAttributeContainer
SetEndVertex()	MbEdge	inline
SetEndVertex(const MbVertex &ver)	MbEdge
SetEndVertexPointer()	MbEdge	inline
SetFaceMinus(MbFace *f)	MbCurveEdge	inline
SetFacePlus(MbFace *f)	MbCurveEdge	inline
SetIntersectionCurve()	MbCurveEdge	inline
SetLabelCacheUse(bool u)	MbTopologyItem	inlinestatic
SetLabelThrough(MbeLabelState l, void *key=nullptr) const	MbEdge
SetLabelThrough(MbeLabelState l, void *key, bool setLock) const	MbEdge
SetMainName(SimpleName n)	MbTopologyItem	inline
SetName()	MbTopologyItem	inline
SetName(const MbName &n)	MbTopologyItem	inline
SetOrientedEdgesLabel(MbeLabelState, void *key=nullptr)	MbCurveEdge
SetOwnChanged(MbeChangedType)	MbTopologyItem	inline
SetOwnChangedFlag(Uint n)	MbTopologyItem	inline
SetOwnChangedThrough(MbeChangedType) override	MbCurveEdge	virtual
SetOwnLabel(MbeLabelState l, void *key=nullptr) const	MbTopologyItem	inline
SetOwnLabel(MbeLabelState l, void *key, bool setLock) const	MbTopologyItem	inline
SetProperties(const MbProperties &)	MbCurveEdge
SetRegistrable(RegistrableRec regs=registrable) const	TapeBase
SetSameSense(bool s)	MbEdge
SetSelected(bool s=true)	MbAttributeContainer
SetSimpleAttribute(MbeAttributeType)	MbAttributeContainer
SetSimpleAttribute(MbAttribute *simpAttr)	MbAttributeContainer
SetSimpleAttribute(const MbAttribute &simpAttr)	MbAttributeContainer
SetStyle(int)	MbAttributeContainer
SetTMaxVertex()	MbEdge	inline
SetTMaxVertex(const MbVertex &ver)	MbEdge
SetTMinVertex()	MbEdge	inline
SetTMinVertex(const MbVertex &ver)	MbEdge
SetTolerance(double eps)	MbCurveEdge
SetVertex(size_t i)	MbEdge	inline
SetVisible(bool)	MbAttributeContainer
SetVisual(float a, float d, float sp, float sh, float t, float e, uint rgb=0)	MbAttributeContainer
SetVisual(const MbRGBA &ambient, const MbRGBA &diffuse, const MbRGBA &specular, const MbRGBA &emission, uint8 shininess, uint8 opacity, uint8 chrom)	MbAttributeContainer
SetWidth(int)	MbAttributeContainer
Tangent(double t, MbVector3D &) const	MbEdge
TapeBase(RegistrableRec regs=noRegistrable)	TapeBase
TapeBase(const TapeBase &)	TapeBase
ToDelete() const	MbTopologyItem	inline
Transform(const MbMatrix3D &, MbRegTransform *=nullptr) override	MbEdge	virtual
Transversal(double t, MbVector3D &f, bool plus) const	MbCurveEdge
Transversal(double t, MbVector &f, MbCartPoint &p, bool plus) const	MbCurveEdge
TransversalReper(double t, MbPlacement3D &pl, bool plus) const	MbCurveEdge
TruncateEdge(double &t, bool beginCutting, const MbSurface *surface)	MbCurveEdge
VertexNormal(bool begin, MbVector3D &normal) const	MbCurveEdge
~MbAttributeContainer()	MbAttributeContainer	virtual
~MbCurveEdge()	MbCurveEdge	virtual
~MbEdge()	MbEdge	virtual
~MbTopologyItem()	MbTopologyItem	virtual
~TapeBase()	TapeBase	virtual