AUXILIARY METHODS
======================
.. _AUXILIARY_METHODS_:

For constructing solids, parameters are required which in some cases must be calculated, as well as auxiliary elements. In this section, the functions that perform auxiliary calculations and constructions are listed. 

.. toctree::

   subsections/EN/Calculating_Extrusion_Body_Depth_or_Rotation_Body_Angle
   subsections/EN/Determining_the_Curve_Image_for_Extrusion_or_Rotation
   subsections/EN/Determining_Extrusion_or_Rotation_Parameters
   subsections/EN/Determine_the_Orientation_of_the_Generatrix
   subsections/EN/Determine_the_Orientation_of_the_Secant_Surface
   subsections/EN/Sweep_Body_Curve_Orientation
   subsections/EN/Copy_Guiding_Curve_of_the_Sweep_Body
   subsections/EN/Constructing_a_Rib
   subsections/EN/Check_a_Curve_for_Ruled_Body_Construction
   subsections/EN/Check_Curve_Parameters_for_Ruled_Body_Construction
   subsections/EN/Check_Curve_for_Constructing_a_Joint_Body
   subsections/EN/Check_Curve_Parameters_for_the_Joint_Body_Construction
   subsections/EN/Construct_a_Curve_from_a_Set_of_Edges
   subsections/EN/Determining_Curve_Crossing_Points